Brad Nails
Straight stick, chisel point galvanized brad nails. Ideal for modeling decorative trim, furniture trim, cabinets, drawers, casebacks,baseboards, chair rails, and picture frames.
Compatible with most 16 gauge or 18 gauge brad nailers. Glue collated.
Smooth surface: Galvanized finish for greater rust resistance. Convenient to use with Chisel Point, Slight Head, Straight trip collation. High hardness, easy to nail.
Brad and finish nail types Material
18 Guage Brad Nails
for fastening carpentary
18 Gauge Finishing nails act as the fasteners while offering a decorative effect. According to their functions and distinctive appearance, people gave these nails many aliases such as lost-head nails, brad nails, headless nails, furniture nails and bullet nails. The upholstery finishing nails are made of tough & slender steel wires.
The finished product has a small globular head that is only slightly larger than the shank. When driven into the wood, it is slightly beneath the surface, then covered with putty or other paint you like. Therefore, finishing nails are visually unappealing in interior decorations, furniture making and other finish works where modification surface is needed.
Uses and benefits
Brad nails are formed from a fine, 18-gauge wire, so they are smaller in diameter than finish nails and typically have less holding strength. They're better suited for tasks like light decorative trim and molding, panel installation and crafts. Their size also helps prevent surface splitting, which can occur if the fastener is too large for the material it's being driven into. One of the benefits to an 18-gauge brad is its size. Thanks to a smaller head and diameter, brad nails are easier to conceal in small pieces of wood trim. With a smaller head size, it's possible that the insertion point may not even need to be concealed with wood putty. In other words, 18-gauge brad nails provide a cleaner look than a finish nail without extra touch-up involved.
Specs
GAUGE: 18GA
HEAD WIDTH: 2.00mm
WIDTH: 1.25mm
THICKNESS: 1.00mm
LENGTH: 13mm - 57mm
Our packages specifications
  (G.W.)Weight Pallet
  (G.W.)F/10F  Brads Nails10mm3/8"100Pcs5000Pcs30Bxs6013.9Kgs834KgsF/13GAUGE:  18GA13mm1/2"100Pcs5000Pcs30Bxs6018.4Kgs1104KgsF/15HEAD  WIDTH: 2.00mm 15mm5/8"100Pcs5000Pcs30Bxs5021.1Kgs1055KgsF/16WIDTH: 1.25mm 16mm5/8"100Pcs5000Pcs30Bxs5022.6Kgs1130KgsF/19THICKNESS:  1.00mm19mm3/4"100Pcs5000Pcs20Bxs5017.7Kgs885KgsF/20 20mm13/16"100Pcs5000Pcs20Bxs5018.3Kgs915KgsF/22 22mm7/8"100Pcs5000Pcs20Bxs5019.7Kgs985KgsF/25 25mm1"100Pcs5000Pcs20Bxs5021.9Kgs1095KgsF/28 28mm1-1/8"100Pcs5000Pcs20Bxs5025.1Kgs1255KgsF/30 30mm1-3/16"100Pcs5000Pcs10Bxs6013.7Kgs822KgsF/32 32mm1-1/4"100Pcs5000Pcs10Bxs6014.2Kgs852KgsF/35 35mm1-3/8"100Pcs5000Pcs10Bxs6015.7Kgs942KgsF/38 38mm1-1/2"100Pcs5000Pcs10Bxs6017Kgs1020KgsF/40 40mm1-9/16"100Pcs5000Pcs10Bxs6017.7Kgs1062KgsF/44 44mm1-3/4"100Pcs5000Pcs10Bxs5019.3Kgs965KgsF/45 45mm1-3/4"100Pcs5000Pcs10Bxs5019.8Kgs990KgsF/50 50mm2"100Pcs5000Pcs10Bxs5021.7Kgs1085KgsF/57 57mm2-1/4"100Pcs5000Pcs10Bxs5026.7Kgs1335Kgs
16 Guage Finish Nails
for upholstering molding and furniture
16 Gauge Straight Finish Nails are made from electro galvanized wire with coating for easier driving and more holding power. Best for furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels.
Compatible with most 16 gauge straight finish nailers. Glue collated. Great for molding and decorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly. Convenient to use with Chisel Point, Slight Head, Straight trip collation. Collation type adhesive for high durable, Fewer tool jams for finer carpentry and finishing. Galvanized finish for greater rust resistance and Fewer too jams for finer carpentry and finishing. High hardness, easy to nail.
Uses and benefits
16 GA Galvanized Finish Nails to complete fastening tasks in finishing applications. Galvanized finish nails have a slight head to leave minimum size hole. The nails feature adhesive collation and a smooth shank.For use in 16 gauge straight finish and brad nailers.
16 gauge straight finish nails are excellent for cabinetry, furniture, baseboard, door and window trim, molding, and much more.
Â
Specs
GAUGE: 16GA
HEAD WIDTH: 2.90mm
WIDTH: 1.60mm
THICKNESS: 1.40mm
LENGTH: 15mm - 64mm
Â
Our packages specifications
  (G.W.)Weight Pallet
  (G.W.)T15T  Brads Nails15mm5/8"50Pcs2500Pcs20Bxs5011.5Kgs575KgsT16GAUGE:  16GA16mm5/8"50Pcs2500Pcs20Bxs5012.1Kgs605KgsT19HEAD  WIDTH: 2.90mm 19mm3/4"50Pcs2500Pcs20Bxs5014.9Kgs745KgsT22WIDTH: 1.60mm 22mm7/8"50Pcs2500Pcs20Bxs5017.24Kgs862KgsT25THICKNESS:  1.40mm25mm1"50Pcs2500Pcs20Bxs5019.7Kgs985KgsT28 28mm1-1/8"50Pcs2500Pcs20Bxs5021.5Kgs1075KgsT30 30mm1-3/16"50Pcs2500Pcs20Bxs5022.7Kgs1135KgsT32 32mm1-1/4"50Pcs2500Pcs20Bxs5024.5Kgs1225KgsT35 35mm1-3/8"50Pcs2500Pcs10Bxs5013.6Kgs680KgsT38 38mm1-1/2"50Pcs2500Pcs10Bxs5014.6Kgs730KgsT40 40mm1-9/16"50Pcs2500Pcs10Bxs5015.3Kgs765KgsT45 45mm1-3/4"50Pcs2500Pcs10Bxs5016.8Kgs840KgsT50 50mm2"50Pcs2500Pcs10Bxs5018.9Kgs945KgsT57 57mm2-1/4"50pcs2500Pcs10Bxs5021.3Kgs1065KgsT64 64mm2-1/2"50Pcs2500Pcs10Bxs5023.8Kgs1190Kgs
15 Guage Angled Finish Nails
for upholstering molding and furniture
 15 Gauge Finish Nails are great for use in most finish and trim applications.These steel nails feature bright finishes which are glued collated.
Available in lengths from 1-Inch to 2-1/2-Inch. Glue collated. Smooth surface: Galvanized finish for greater rust resistance. Function: Use for moldings, picture-frame assembly, trim and cabinetry building. Convenient to use with Chisel Point, Slight Head, Straight trip collation. Galvanized surface makes better rust and corrosion resisitance. High hardness, easy to nail.
Uses and benefits
Finish nails are made from heavier 15-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is more suitable. A finish nail offers increased support and withdrawal resistance versus the brad nail, making it the better choice when installing larger trim and woodwork.
Because it leaves a more visible hole in the surface, a fully driven finish nail almost always requires followup attention—which includes being puttied over to conceal the "shiner" (the exposed insertion point of a nail).
Specs
GAUGE: 15GA
HEAD WIDTH: 3.10mm
WIDTH: 1.76mm
THICKNESS: 1.76mm
LENGTH: 25mm—64mm
Our packages specifications
  (G.W.)Weight Pallet
  (G.W.)DA/25ANGLE DA FINISH NAILS25mm1"100Pcs4000Pcs4Bxs1208.58Kgs1029.6KgsDA/32DEGREE:34°32mm1-1/4"100Pcs4000Pcs4Bxs12010.9Kgs1308KgsDA/38GAUGE:  15GA38mm1-1/2"100Pcs4000Pcs4Bxs9012.74Kgs1146.6KgsDA/45 HEAD WIDTH: 3.10mm x 2.4mm45mm1-3/4"100Pcs4000Pcs4Bxs8014.9Kgs1192KgsDA/50WIDTH:  1.76mm50mm2"100Pcs4000Pcs4Bxs6016.74Kgs1004.4KgsDA/57THICKNESS:1.76mm57mm2-1/4"100Pcs4000Pcs4Bxs6018.62Kgs1117.2KgsDA/64LENGTH:25mm-64mm64mm2-1/2"100Pcs4000Pcs4Bxs6020.74Kgs1244.4Kgs
Â
BRAD NAILS APPLICATION
Brad nail uses include decorative trim, picture frame and paneling. They work well on birdhouses and other thin cuts of wood. Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding.
Trim and baseboard
Decorative trim, picture frame and paneling
Exterior trim, window and door casing and chair rails
Brad Nails we provide
Welcome To Visit Our Factory
Al-Madina Steel is one of the most important leading companies in the manufacture of fasteners in the Middle East. We are present in the Arab Republic of Egypt, where the unique location between the countries of the world from the East and the West. We have been present for more than 15 years. We are proud to export to many Arab, African, European and American countries, as the countries we export to have reached more than 45 countries around the world are proud of our quality and our goal is always and forever Quality first and foremost and the trust of our customers and maintaining them for a permanent relationship is what we aspire to and strive for.
FAQ
Nails
Yes, we can provide professional outer packaging design.
Brad nails are formed from a fine, 18-gauge wire, so they are smaller in diameter than finish nails and typically have less holding strength. They’re better suited for tasks like light decorative trim and molding, panel installation and crafts. Their size also helps prevent surface splitting, which can occur if the fastener is too large for the material it’s being driven into.Â
One of the benefits to an 18-gauge brad is its size. Thanks to a smaller head and diameter, brad nails are easier to conceal in small pieces of wood trim. With a smaller head size, it’s possible that the insertion point may not even need to be concealed with wood putty. In other words, 18-gauge brad nails provide a cleaner look than a finish nail without extra touch-up involved.
Â
Finish nails are made from heavier 15- or 16-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is more suitable. A finish nail offers increased support and withdrawal resistance versus the brad nail, making it the better choice when installing larger trim and woodwork.
Because it leaves a more visible hole in the surface, a fully driven finish nail almost always requires followup attention—which includes being puttied over to conceal the “shiner” (the exposed insertion point of a nail)
Brad nailers are used for on wood where splitting might be an issue or where you would want a thinner nail for less of a hole. They have many uses but they are most commonly used for:
1.Trim work
2.Paneling
3.Fastening decorative molding
4.Casing
5.Baseboard
Brad nails act as the fasteners while offering a decorative effect. According to their functions and distinctive appearance, people gave these nails many aliases such as lost-head nails, brad nails, headless nails, furniture nails and bullet nails. The upholstery finishing nails are made of tough & slender steel wires. The finished product has a small globular head that is only slightly larger than the shank. When driven into the wood, it is slightly beneath the surface, then covered with putty or other paint you like. Therefore, finishing nails are visually unappealing in interior decorations, furniture making and other finish works where modification surface is needed.
Factory
Yes,we not only have our own factory.
We are pleased to send you the sample to test the quality and market.
Yes, OEM service is available.
It usually takes about 20-30 working days to produce one order.
Normally T/T 30% in advance and T/T 70% before shipment.
Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.
Yes, we have CE, SGS,ISO, ect.